#Importation
import adafruit_dht
import adafruit_bmp280
import board
import busio
import time
import math
from datetime import datetime

#Déclaration du capteur
dhtDevice = adafruit_dht.DHT22(board.D4)

i2c = busio.I2C(board.SCL, board.SDA)

bmp280 = adafruit_bmp280.Adafruit_BMP280_I2C(i2c, address=0x76)

#Couleurs
RED = "\033[91m"
GREEN = "\033[92m"
YELLOW = "\033[93m"
BLUE = "\033[94m"
MAGENTA = "\033[95m"
RESET = "\033[0m"

#Calcul du point de rosée
def calculer_point_de_rosee(temperature, humidity):
    # Formule pour calculer le point de rosée
    alpha = 17.27
    beta = 237.7
    gamma = (alpha * temperature) / (beta + temperature) + math.log(humidity / 100.0)
    point_de_rosee = (beta * gamma) / (alpha - gamma)
    return point_de_rosee

#Calcul de l'humidex
def calculer_humidex(temperature, point_de_rosee):
    # Formule pour calculer l'humidex
    humidex = temperature + (5/9) * (6.11 * math.exp(5417.7530 * ((1/273.16) - (1/273.15 + point_de_rosee))) - 10)
    return humidex

#Boucle et affichage
while True:
    humidity = dhtDevice.humidity
    temperature = dhtDevice.temperature
    pression = bmp280.pressure
    if humidity is not None and temperature is not None:
        now = datetime.now()
        date_heure = now.strftime("%d-%m-%Y %H:%M:%S")
        point_de_rosee = calculer_point_de_rosee(temperature, humidity)
        humidex = calculer_humidex(temperature, point_de_rosee)
        print(f"{BLUE}Date et heure:{RESET} {date_heure}")
        print(f"{GREEN}Température:{RESET} {temperature:.1f}°C")
        print(f"{YELLOW}Humidité:{RESET} {humidity:.1f}%")
        print(f"{RED}Point de rosée:{RESET} {point_de_rosee:.1f}°C")
        print(f"{MAGENTA}Humidex:{RESET} {humidex:.1f}")
        print(f"{BLUE}Pression atmosphérique:{RESET} {pression:.2f}")
        print("----")
    else:
        print("Échec de la lecture du capteur")

    #Pause de 20 secondes
    time.sleep(20)